Assembly/Disassembly
2.5 Safety and system checks
Recheck the actual status of the entire assembly as follows:
Mechanical setup
1. Ensure the stacking frame is properly secured against
movement and possible tipping over using appropriate rachet
straps and fixing points.
2. Ensure the Locking pins of the front fixing support to the first
cabinet are fully inserted and properly locked on both sides.
3. Ensure both Locking pins fixing the Splay link of the first
cabinet to the rear Splay link slot of the frame are fully inserted
and properly locked.
4. Ensure all Locking pins of the Front links of each cabinet are
fully inserted and properly locked on both sides.
5. Ensure the Splay links of each cabinet are fixed in the Tension
mode hole (
Þ
) with Locking pin
[3] and that this pin is
fully inserted and properly locked.
6. Check the splay angles and the attachment of the Splay links
at the rear of the cabinets and ensure all Locking pins are fully
inserted and locked.
7. Ensure the Front links of the uppermost cabinet are kept in their
park positions.
Wiring
▪ When the amplifiers are wired and powered on, use their
System check functions or channel mute switches and a test
signal to check the correct operation and routing of all channels
and cabinets.
▪ Alternatively check the wiring using the Array verification
function in R1.
2.6 Disassembly
NOTICE!
The same safety instructions apply.
To dismantle the groundstack, follow the assembly and setup
instructions in reverse order.
d&b Z5731 Rigging manual 1.1 en
8
All manuals and user guides at all-guides.com
