Technical specifications
Fig. 9: Qi7 frequency response, standard
and CUT settings
Qi7 system data
Frequency response (–5 dB standard)................................................60 Hz ... 17 kHz
Frequency response (–5 dB CUT mode)...........................................100 Hz ... 17 kHz
Max. sound pressure (single cabinet, 1 m, free field) with D12.....................138 dB
Max. sound pressure (single cabinet, 1 m, free field) with D6.......................134 dB
(SPLmax peak, pink noise test signal with crest factor of 4)
Input level (100 dB-SPL/1 m)...............................................................................–17 dBu
Qi7 loudspeaker
Nominal impedance.................................................................................................8 ohms
Power handling capacity (RMS / peak 10 ms).......................................400/1600 W
Nominal dispersion angle (hor. x vert.)...........................................................75° x 40°
Components...................................................................................................2 x 10” driver
........................................................................................................1.3” compression driver
....................................................................................................Passive crossover network
Connections...............................................................................................................2 x NL4
...........................................optional fixed cable (H-07-RN-F 2 x 2.5 qmm/AWG 13)
Pin assignments.................................................................................................NL4: 1+/1–
.............................................................................................Fixed cable: Brown + / Blue –
Weight...............................................................................................................21 kg (46 lb)
308
[12.13
"]
308308
580 [22.83"]
41
0 [1
6.14
"]
15
°
154 [6.06"]
60 [2.36"]
310 [12.20"]
310
310
20
4.
5 [
8.
05
"]
20
4.
5 [
8.
05
"]
Fig. 10: Qi7 cabinet dimensions in mm [inch]
Altering the HF horn dispersion
Fig. 11: Horn dispersion label
The Qi7 HF horn has a square flange allowing it to rotate through 90°.
Tools required: 3 mm Allen key (Torque wrench)
To rotate the horn the front grill needs to be removed.
1.
Undo the six countersunk Allen screws that hold the front grill
in place and remove the front grill.
2.
Undo the four countersunk Allen screws of the horn.
3.
Rotate the horn through 90° - Fig. 11.
4.
Refit the horn and tighten the four screws of the horn to a
torque of 2 Nm.
5.
Refit the front grill and tighten the six screws to a torque of
2 Nm.
Qi7 Manual
(1.2 EN)
Page 8 of 10
Summary of Contents for Qi7
Page 1: ...Qi7 Manual 1 2 EN ...
