background image

Symbols on the equipment

Please refer to the information in the operating manual.

WARNING! 
Dangerous voltage!

Contents

Safety precautions..............................................................3

Information regarding use of loudspeakers.............................................3

J12.......................................................................................4

J-Series rigging components
J-Series arrays.................................................................................................4
Connections......................................................................................................5
Operation with D12.......................................................................................5
Dispersion characteristics...............................................................................6
Technical specifications...................................................................................7

Manufacturer's Declarations..............................................8

EU conformity of loudspeakers (CE symbol).............................................8
WEEE Declaration (Disposal)........................................................................8

General Information

J12 Manual

 

Version 1.2 EN, 03/2008, D2981.EN .01

Copyright © by d&b audiotechnik GmbH 2008; all rights reserved.

Keep this manual with the product or in a safe place so that it is
available for future reference.

When reselling this product, hand over this manual to the new
customer.

If you supply d&b products, please draw the attention of your
customers to this manual. Enclose the relevant manuals with the
systems. If you require additional manuals for this purpose, you can
order them from d&b.

d&b audiotechnik GmbH
Eugen-Adolff-Strasse 134, D-71522 Backnang, Germany
Tel49-7191-9669-0, Fax +49-7191-95 00 00
E-mail: [email protected], Internet: www.dbaudio.com

Summary of Contents for J12









Reviews: