E18-SUB
Fig. 1: E18-SUB loudspeaker
The E18-SUB is a compact, very low tuned bass-reflex design employing
a single 18" driver.
The E18-SUB cabinet is constructed from marine plywood and has an
impact resistant paint finish. The front of the loudspeaker cabinet is fitted
with a rigid metal grill covered with a replaceable acoustically
transparent foam and fitted with catches at the top and bottom to
secure an optional transport lid (E7908). The cabinet incorporates a
pair of steel handles and on the rear panel four heavy duty wheels. An
M20 threaded flange in the top panel accepts the Z5013 Loudspeaker
stand for the deployment of full range cabinets.
NOTICE:
Only operate E18-SUB subwoofers with a correctly configured d&b
amplifier, otherwise there is a risk of damaging the loudspeaker
components.
Connections
1
2
3
4
5
1
2
3
4
5
Sense Drive
n.c.
Fig. 2: Connector wiring
The E18-SUB cabinet is fitted with a pair of EP5 connectors. All pins of
both connectors are wired in parallel.
The E18-SUB uses the pin assignments 3/4 and 5 (Pin 5: SenseDrive -
D12 only and in conjunction with 5-wire cables).
Pins 1/2 are designated to d&b full range systems.
Using one connector as the input, the second connector allows for direct
connection to additional cabinets.
The E18-SUB can be supplied with NL4 output connectors as an option
using the pin assignment 2+/2–. Pins 1+/1– are designated to d&b full
range systems. The D12 SenseDrive function is not available with NL4
connectors.
Pin equivalents of EP5 and NL4 connectors are listed in the table below.
EP5
1
2
3
4
5 (SenseDrive SUB)
NL4
1+
1-
2+
2-
n.a.
E18-SUB Manual
(3.1 EN)
Page 4 of 8
Summary of Contents for E18-SUB
Page 1: ...E18 SUB Manual 3 1 EN ...
