(2.0 E)
Z5052
WARNING!
Z5052 Ci60/Ci90 Flying bracket
[1]
[2]
[3]
[4]
[5]
Z5052 Ci60/Ci90 Flying bracket
The Ci60/Ci90 Flying bracket enables Ci60 or Ci90 loudspeaker
cabinets to be mounted and set to different horizontal or vertical
angles.
To fly the loudspeakers, use either the Z5010 TV spigot with fixing plate,
or bolt two Q9031 M8 Safety eyebolts to the bracket and then fly the
bracket from these using steel wire ropes.
The Z5012 Pipe clamp (max. 50 kg/110.2 lb) or the Z5016 Pipe
clamb HD (max. 70 kg/154.3 lb) can also be used with the Z5010
TV spigot to suspend Ci60/Ci90 loudspeakers from an overhead bar
or truss with a tube diameter between 32 mm and 50 mm.
The Ci60/Ci90 Flying bracket can also be used with the Z5024
loudspeaker stand adapter.
A hole (M10) is located between the M8 inserts for fixing a single
Ci60 or Ci90 loudspeaker to an e.g. additional wall bracket.
Load safety information
The maximum permitted safe working load (SWL) for
the Ci60/Ci90 Flying bracket is 27 kg/59.5 lb (a single
Ci60 or Ci90 cabinet) and this value must on no
account ever be exceeded.
The bracket legs must only be loaded with straight
tension.
Using the hole between the M8 inserts for fixing the
flying bracket to an e.g. additional wall bracket there
must be direct connection between the flying bracket
and the leg of the additonal wall bracket. If necessary
use a extensive plain washer.
Secondary safeties should always be provided and
used when flying or fixing loudspeaker loads
overhead.
Part list Z5052
−
1 x Z5052, Ci60/Ci90 Flying bracket
[1]
−
2 x M10 x 25 Hex head bolt
[2]
−
2 x M10 Spring washer
[3]
−
2 x 10.5 Plain washer
[4]
−
2 x Rubber washer
[5]
Weight Z5052
2.5 kg/ 5.5 lb
Assembly
The Ci60/Ci90 Flying bracket [1] is supplied with two M10 hex head
bolts [2], spring lock washers [3], plain washers [4] and rubber washers
[5] The flying bracket is attached to the M10 threaded inserts on each
side of the speaker cabinet using a open wrench SW 17.
