33
32
19
The UV-resistant side of polycarbonate sheets must face outside (sunward). The UV-
resistant side is usually indicated with notations on the shipping plastic film. The
film is transparent on the back side of the polycarbonate sheet. After marking the
polycarbonate sheets, but prior to cutting it, mark the UV-resistant side on every piece
of polycarbonate sheet: when the shipping film is removed both sides look similar. The
shipping film is removed from both sides shortly before fastening the covering in the
frame.
Tape scotch on the cut sides of the
polycarbonate sheets.
12000
2000
1000
1050
2100
х1
х2
L=1,05м
double-sided scotch
tape
Arrowed line on
the piece indicates
the butt end of the
greenhouse.
1050
21
20
!
Do not screw until tight.
х1
Scotch tape.
1050
M4x25
х2
M4
х2
Summary of Contents for TITAN Arch 90
