Dancover TITAN Arch+ 60, Manual

Page: 3 / 23

3
2
Technical certificate/GREENHOUSE «TITAN Arch+ 60»
Description
The «TITAN Arch+ 60» greenhouse is designed to create a favorable microclimate for
growing crops in allotments and family gardens.
The greenhouse is available in different lengths depending on the buyer’s choice. The
required length of the greenhouse is attained by buying additional boxs with extension inserts.
Each insert lengthens the standard supply set of the greenhouse by 2 m. The length of the
standard supply set is 4 m. The height of the installed frame of the greenhouse is 2.1 m.
The frame of the greenhouse is made of galvanized steel pipes and profiles and is assembled
with screws and nuts. The kit includes everything you need for fixing the glazing. The complete
set of the greenhouse is glazed at the request of the buyer. The standard supply set requires
3 sheets of 2.1 x 6 m polycarbonate 4 or 6 mm thick: one 2.1 x 6 m polycarbonate sheet for
each insert.
The assembly and operation of the «TITAN Arch+ 60» greenhouse should
be carried out strictly in accordance with the Assembly manual and
operating rules set forth in the technical certificate. The technical
certificate must be kept.
!
Operating rules
Before starting the operation, the greenhouse should be assembled and installed according
to the assembly manual instructions. When installing the greenhouse by third parties, the buyer
should check the assembly quality for compliance with the Assembly manual instructions.
Do not install the greenhouse close to buildings and trees from which snow or ice may fall.
The distance of at least 2 m is recommended.
The greenhouse is designed to withstand the wind speed no more than 24 m/s.
The maximum snow load for the framework occurs when the weight of a snow cover is 60 kg
per 1 m 2 of the horizontal surface of the ground. It is necessary to avoid exceeding the snow
load on the greenhouse: either to remove snow from the greenhouse after each snowfall, or
remove the greenhouse glazing for winter, or install the sliding panels over all spans of the
frame and shift them to the lower position for winter.
Technical certificate/GREENHOUSE «TITAN Arch+ 60»
Warranty
Claim submission period is 24 months from the date of purchase.
Cleaning and washing polycarbonate panels
Warranty does not apply to cases if:
1. Installation of the structure in violation of the requirements of the instructions.
2. Violation of the operating rules.
3. Misuse of the structure.
4. The presence of corrosion traces on the cutoffs of parts, because this does not affect the
performance of the structure.
5. Greenhouse deformations due to excess of snow load stated in the technical certificate of
the greenhouse.
6. Greenhouse deformations due to soil movement.
7. Floods, hurricanes, and other natural disasters.
1. Rinse the panel with warm water.
2. Wash the panel with a mild soap solution or household detergent and warm water, using a
soft cloth or sponge to remove dirt.
3. Rinse with cold water and wipe with a soft cloth.
Do not use abrasives or highly alkaline cleaning agents to clean polycarbonate panels. Dry
wiping of the surface will damage the protective layer of the glazing and shorten its effective
life. Do not rub the surface of polycarbonate panels with brushes, metallic fabric or other
abrasive materials. When disinfecting a greenhouse from pathogens of fungal and bacterial
diseases, do not apply sulfur candles to avoid corrosion of the frame.
The manufacturer reserves the right for vent engineering design changes.