PUTTING YOUR TENT UP
1)
Lay out the groundsheet, rotate it so the door is facing the desired direction and
pin it down tightly with pin pegs.
2)
Take out the metal center pole and extend it. Unzip the door and take the center
pole with rubber stoppers at each end inside the tent. Find the top/center of the tent
and match it with the end of the pole. Then pull the pole in and up so you raise the
roof of the tent.
3)
Zip up the door and adjust the guy rope slider so you have approximately 50cm of
loop to the peg. This allows adjustment in both directions.
4)
Use the rest of the pegs to attach the guy ropes around the whole tent without
putting any of them too much tension. All the guy ropes need to follow the seam
lines in the roof. Get all the pegs in then go round adjusting the guy ropes to create
the desired tension. Tie down the elastic tie with the pegs to cover the groundsheet
zip.
Enjoy your teepee tent and please remember, only store it bone dry!
