2
3
Detailed set of parts for Seedbed for greenhouse
Border
№
view
name
length,
m
quantity, pcs
1
Transverse part
0,95/
0,65
2
2
Lateral part without a lock
0,98/
1,98
2
3
Corner strap
0,42
4
4
Sharp-tipped screw
24
Insert (border extension)
5
Clamper
0,42
2
6
Lateral part with a lock
1,98/
0,98
2
7
Tie
0,95/
0,65
1
8
Sharp-tipped screw
8
Technical data sheet
Technical data sheet
Description
Galvanized border is designed to shape seedbeds in garden and household plots,
in open ground and in greenhouses. Bed width is 1 m or 0.7 m. The required length
is provided by the purchase of additional packages with extension inserts that add 1
m or 2 m to the basic length. Height of an installed border is 17 cm above the ground
level, while its support legs should go down into the soil 25 cm deep.
After placement of the assembled border on the bed, press gently to push the
clampers and corner straps into the soil without slanting.
Before the start of operation the seedbed should be assembled in accordance
with the instruction. There is no need to dismantle it for the winter period.
Warranty liabilities
1.The manufacturer is responsible for the
completeness of parts.
2. The manufacturer is responsible for assemblability
of the border in accordance with instructions.
3. Term for making claims is 12 months from the day
of purchase.
Terms of warranty liabilities
Warranty does not apply to cases of:
1. Installation of the border in violation of instruction
requirements.
2. Deformations of the border due to soil movements.
3. Damage to the border in the course of operation
shall not provide any grounds for making claims.
The company reserves the right to make changes in the seedbed design.
