Dancover PRO EventZone 9m Series, Manual

Page: 9 / 18

⚫
Erect all frames and put the purlins on the roof as the first section.
⚫
Use bolt M12x70 to fix the leg NO.5 and Roof beam NO.1 and Top connection
through NO.31
⚫
Use bolt M12x120 to fix the (NO.2,5) and Gable Purlin (NO.6,7).
⚫
Use bolt M12x100 to fix Tie down on the NO.2 and NO.5.
2. ’Roof Cover and Sidewalls’ Assembling Guide
⚫
Roof - Cover
⚫
Unpack the Roof - Cover and put onto a protecting foil or carpet to avoid it
getting dirty or damaged.
⚫
Throw 2 PCS of Setup - Ropes over the first unit of the tent.
⚫
Tie the Setup - Ropes with the straps inside of the Roof - Cover.
⚫
Lift the Roof - Cover up to the eaves and insert the Keder into the groves of the
Roof - Beams.
⚫
Slowly pull in the Roof - Cover with equal force on both sides.
⚫
Pull in until the Roof - Cover reaches the opposite eaves.
⚫
Repeat the procedure until all Roof - Covers have been pulled on.