Dancover Polytunnel Greenhouse, Manual

Page: 5 / 7

USER’S IMPORTANT INFORMATION
Proper use of the garden tunnel is provided by correct assembly as per the manufacturer’s instructions:
1. The tunnel must be carefully assembled, as per the guidelines in the manual.
2. All elements of the tunnel construction should be carefully secured with tacks in the connections from all sides
3. The foil should be assembled on sunny and windless days, which will make the work considerably easier. Firm
4.
During winter periods garden foil should be removed from the construction.
strengthen the tunnel by sticking metal or wooden poles and fasten them to the bows.
6. In longer tunnels additional reinforcement of the whole construction is recommended, through connection of
particular bows in their upper part with the use of an additional tube or a thick wire (the so-called ridge lath)
7. The tunnel’s construction may additionally be reinforced using polypropylenic string that will be winding crossly the
tunnel’s surface and that will be fastened to the metal hooks at the ground.
8. Don’t leave the tunnel opened at strong wind, because it may cause the damage of particular parts of the tunnel.
9. One should not attach the strings supporting the plants to the bows, because it may cause the damage of particular
parts of the tunnel.
10. The garden tunnel should not be placed in the open space. It should be placed near the buildings or trees and
bushes.
11. During the assembly the ambient temperature should not be lower than 10°C.
THE MANUFACTURER is not responsible for improper use of the tunnel, other than intended use and for the
damages that occurred as a result of extreme weather conditions, such as strong wind, hailstorm, snow etc.
Internal layer ensures increased thermal insulation properties, which results in keeping greater amount of thermal
radiation inside the tunnel.
External layers ensure:
proper elasticity, increased durability and resistance to damages and perfect permeability of light.
Advantages of three-layered foil
- perfect mechanic durability (addition of metallocene)
- perfect permeability of daylight
- high elasticity and resistance to low temperatures
- ensuring the greenhouse effect
Three-layered foil
THE COMPONENTS OF TUNNEL CONSTRUCTION
Corner T-piece T00001 4 pcs
Tunnel T-piece
32/32/90
T00005 28 pcs
Tunnel T-piece
32/32/67
T00030 8 pcs
Tunnel elbow
32/90
T00002 8 pcs
Tunnel hinge T00006 6 pcs
The door frame T00078
2 pcs +
2
2 nuts
Four-way tunnel
piece
T00004 5 pcs
The pin to foil T00008 72 pcs
Connecting
tube
Ø 28 x 0,2 m
T00033 8 pcs
Tacks 1 op
Assembly pins 6 pcs
* length tolerance of the tubes is within ± 1 cm
1,98 m the tunnel’s length
T00064 2 pcs
1,77 m door frame hei gh t T00063 4 pcs
1,68 m door crossbar T00077 2 pcs
1,65 m bows T00062 9 pcs
1,58 m door height T00061 4 pcs
1,10 m the tunnel’s width T00058 4 pcs
0,96 m horizontal elements T00056 10 pcs
0,88 m width over door frame T00054 2 pcs
0,79 m
door width
T00053 4 pcs
0,60 m door frame T00051 4 pcs