Side 6
Instruction manual
| 4 / 8 |
–
Roof plates
4. Tagplader
(a) Start monteringen af tagplader i den åbne ende, ved yderkanten af det første spær (det er vigtigt, at lægterne ligeledes
er skåret rene med yderkant af det første spær).
(b) Med 1½ bølges overlæg, placeres 8 tagplader på toppen. Skruerne sættes i midt på pladerne og i samlingerne i hver
lægte.
4. Roof plates
(a) Start the installation of roofing plate at the open end from the top, at the outer edge of the first rafter (it is important
that the battens are also cut clean with the outer edge of the first rafter).
(b) With 1½ corrugation overlay, place 8 roofing sheets on top. The screws are inserted in the middle of the plates and in
the joints in each batten. The screws are mounted in the bottom of corrugation.
NOTE!
If there are
LIGHT WINDOWS
, they must be mounted in a top row.
a
b
•
8 Pcs. Roof plate
•
34 Pcs. Roof screws
