3
Tips
The base has to be fastened in a non-freezing depth <80cm>.
The greenhouse is to be fastened to the base.
The base has to be 100% level and square. The easiest way to ensure this is
that the two diagonal measurements are identical.
We recommend greasing the screws for the doors for an easier assembly.
Glazing should only be carried out in fairly calm weather.
Make sure that the greenhouse is square before starting to glaze.
We recommend the frames to be degreased with acetone before glazing.
We recommend using working gloves while glazing.
An assistant make the job easier.
Tools
The greenhouse is assembled by means of the following tools:
Spirit level
Spanner/socket spanner 8 and 10 mm
Screw driver
Silicone pistol
Acetone for degreasing the frames
Please put on gloves avoid of slitting your hands.
Avoid of crashing the material, results in un-
shapes, it is not fits in fixture.
Avoid of materials cuts the polycarbonates
sheets.
Cautions
