Cover is assembled with the help of plastic clips. When
assembling the cover, please cut out the shape of the front
and back wall and rectandular shape for the doors and
attach them to the corresponding construction parts. The
rest of the cover is already precut. The main part should be
placed along the whole tunnel from the top of the front wall
to the top of the end wall. The pieces of cover for the
curtain should be attached to the horizontal connector.
Assembly
Tunnel construction consists of tubular parts, hot-dip galvanised in and out,
postfabricated, which prevents them from corrosion. Assemble tubes according to
the drawing, cut the cover according to the drawing (only the front and the back
wall and doors; the rest is precut), put it on the tunnels construction stretching it
and pin it to the tubular part with the clips. Construction can be easily transported
to another place or reassembled.
Assembly manual – TUNNEL 4,0 x 2,4 x …m
1. All construction parts of the construction correspond to the
specification.
Distance between bows is 1,25m. Depending on the number of bows the length of
the tunnels increases 1,25m with each bow. Please find below the drawing with
tunnel dimensions.
2 Assembly of the front and back wall with door
This is how the front/back wall should be assembled. The door frame and the door
is assembled with the help of reversible clamps (nr 13 in specification).
3 Cover/moscitoe net assembly.
COVER
Cover stretched from the top of the tunnel
must be attached to the cover holding strip.
The rest of the cover must be attached to the
rolling mechanism with clips
Moscitoe net is
attached to the tube
behind the cover
holding strip with (the
help of) clips
Both cover and the
other end of moscitoe
net must be attached
here. The rest of the
cover must be dug
into the ground
Cover which must be dug into
the ground
“Cover, hobby tunnel 4,0x2,4xL (m)”
