KEEP WORKING AREA CLEAN AND DRY
A cluttered, damp or wet working area may cause injuries.
Safety Warning & Advice
PREPARE A FLAT AND LEVEL BASE
Make sure your greenhouse is located on a flat and level surface.
Although this greenhouse is designed to withstand greater wind loads than many other
greenhouses, do not install it in on a windy day or in an area which is subject to high winds.
A partially completed greenhouse may be seriously damaged if it is left in this state. It is
your responsibility to safely and securely anchor the greenhouse, having regard to wind
conditions in your area.
DO NOT INSTALL THE GREENHOUSE ON A WINDY DAY OR
IN AN AREA SUBJECT TO HIGH WINDS
POLYCARBONATE SHEET
Remove approximately 2 inches of film from all sheet edges before installing and remove all film
immediately after the construction is completed. Please ensure that the side with the white film
faces outwards.
CHECK PARTS BEFORE ASSEMBLY
All parts have been well labelled. Please sort, separate and identify all components before
construction and check against the parts list in this manual.
WARNING
Do not install this product when you are tired or distracted from the job at hand. We recommend
that you use gloves during assembly.
POWERED SCREWDRIVER RECOMMENDED
This quality greenhouse features self-tapping screws to provide strong joints. As the name
suggests, the screws tap their own thread. Driving in self-tapping screws requires more force
than conventional screws. A powered screwdriver is therefore recommended.