4
12.
13.
14.
15.
15
12
15
12
16
16
Fasten the handle (16) using M5x40 mm bolts (10) and M5 nuts (11).
Seal the edges of the polycarbonate with the added aluminum strip (13).
Cover the structure with a transparent tarpaulin (15). Level so that the entire
structure is evenly covered. The awning is attached to the structure with M5x40
mm screws (10) with M5 gaskets (11) and nuts (12). The edges of the sheet must
engage on the sides behind the polycarbonate sheets.
Use a sharp knife to trim the protruding polycarbonate sheets (14) to the structure.
