Check if the awning is level with the use of the spring
level (28) on the front bar. Adjust the angle adjuster at
either end by loosening the locking nuts of the angle
adjuster ,turn the jack bolt to adjust the pitch.Adjust the
arm until the front profile is level.Tighten the locking
nuts again to fix the level of awning.
To adjust the inclination of the awning,adjust the angle
adjuster on both arm shoulders to achieve the desired
inclinaton.Fix the locking nuts when the awning is level.
LOCKING NUTS
ARM
JACK BOLT
Open
tight
tight
1
2
3
15
、
Warning: When the front
bar touches the end cap
shown in the image, do
not try to bring them
closer. Otherwise, the
product may be damaged.
7
Summary of Contents for AW148011
Page 1: ...27 02 2020 for Retractable Awning 3 95x2 5m w Crank Handle Manual ...
Page 2: ...Retractable Awning 3 95 2 5m ...
Page 6: ...5 21 28 2 tight tight tight tight insert in insert in 2 9 8 9 10 11 22 21 22 21 5 27 4 27 5 ...
Page 7: ...C A 0 17 H 84 C Ground X 100 12 13 8 4 50 X X 2 X 2 50 50 X 2 Ø12 100mm 15 14 14 6 ...