Cellular polycarbonate shall be installed strictly defined side out
(towards the sun), which has a protective layer. The protective layer is
usually at the side with the inscriptions on the transport film. The film
on the other side of sheet is transparent. After marking the sheet, but
prior to its cutting, make a mark on the protected side of the sheet
for each piece: after removal of the transport film sheet sides are
not visually different. The transport film is stripped from both sides
immediately before fixing the cladding on the frame.
Sections of polycarbonate
with open honeycombs
should be covered by
adhesive tape.
9
.1
Rotator for locking the window is installing similarly
8
Insert
wire
rotator
for
door
closing
in
free
holes
(against
the
stop)
through
elements
12
and
17
by
straight
end from
inside.
Use
straightpart
of
the
tube
running to
bend
rotator
in
the
opposite
direction.
Set elastic
header on
the
rotator.
This construction allows to push the door in the closed position, being both outside and
inside the
greenhouse.
1)
2)
3)
1.
17
2.
№29
box
2
1
pc.
№29
box
2
1
pc.
№30
box
2
1
pc.
№29
box
2
1
pc.
17
1.
2.
1)
2)
3)
№29
box
2
1
pc.
№29
box
2
1
pc.
№29
box
2
1
pc.
№30
box
2
1
pc.
19
