机翼拼装 Assemble the Wing
2
舵面的安装 Install the Control Surface
副翼舵面，建议最多埋入3个合页，平尾垂尾舵面，建议最多埋入3个合页
It is recommended to embed at most 3 hinges for aileron control surface, and it is recommended to embed at
most 3 hinges for horizontal and vertical control surface.
左右各埋入3mm左右，中间铰链部分留2mm左右，打胶固定并保证合页的灵活性。
Each side is embedded about 3mm, and the middle hinge part is left about 2mm. It is glued and fixed to ensure
the flexibility of the hinge.
重心位置展示 Display for C.G
起落架及风挡的安装 Install the Landing Gear and Windshield
注意 ： 先完成蒙皮，再安装舵面。
Remarks: Pls install the control surface after you finish
the film covering.
蒙皮详细操作可查看以下链接内容，
我们提供了蒙皮范本（可直接扫二维码）
http://www.dwhobby.com/art/film
注意：设置重心时，可用电池配重，调整电池
位置以达到合适的重心。然后用魔术胶带把电
池固定在仓身内。
Note:When you adjust the C.G., you can
use the battery as balance weight, and
adjust the battery positon to find the
suitable C.G., then fasten the battery into
the cabin with magic tape.
E1
E3
E3
R1
R2
R3
R5
R6
R7
R4
R8
R9
R10
E2
E4
E5
E6
E7
E8
E8-1
E8-1
L2
L2-1
L1-1
L1-2
L1-2
L1-3
L1-3
W-1
W-1
L4
W5
W3
W2
W2
W3
W4
W4
W6
02-1
02-2
02-3
02-4
02-5
02-6
02-6
02-7
L5
L6
L4-1
02-8
02-8
A1
A1
A2
A2
A2
A2
对齐 Align
细节Detail 1
细节Detail 2
细节Detail 3
以相同的方法拼另一边。
Assemble the other side
in the same way.
机翼中间安装碳杆插销。
Install the carbon rod
latch in the middle of the
wing.
轮挡
Wheel stopper
机轮
Wheel
起落架插入机身，中间缝隙插入小木片，用胶水粘固。
Insert the landing gear into the fuselage,then insert small
piece of wood into the middle slit and glue them.
风挡折叠到合适形状，用快干胶粘贴。
Fold the windshield into a suitable
shape and paste it with
quick-drying glue
≈40mm
04-1
04-2
04-3
自攻螺丝
03-1
03-2
Self-tapping screws
