机翼安装图示 Wings installation show
1.3
U2
U2
碳管 10*390mm
Carbon tube
10*390mm
碳管 12*245mm
Carbon tube
12*245mm
碳管 10*345mm
Carbon tube
10*345mm
碳管 10*280mm
Carbon tube
10*280mm
M3 自攻螺丝
M3 自攻螺丝
1
2
3
1.2
马达座安装图示
Motor mounting board installation show
马达座根据选用马达的长度，调整马达座伸出长度，然后用角型铝块
加自攻螺丝固定住。
像真引擎用胶水固定到马达座上。机头罩用自攻螺丝固定
到机身头部
像真引擎安装图示
Scale engine installation show
马达座安装图示 Motor installation show
机身内舵机安装图示 Servos installation show
上机翼锁定位置 Upper wing locked position
机翼支架安装图示 Wing's bracket installation show
中机翼锁定位置 Middle wing locked position
下机翼锁定位置 Lower wing locked position
M4*10 螺丝
Screw
M4*15 螺丝
Screw
M4*15 螺丝
Screw
M4*15 螺丝
Screw
B5
B5粘贴到机翼预留槽内
Stick B5 on the reserved slot of wing.
B5
B6
B6
B5
M3*20螺丝+螺帽
上机翼连接处相同安装
The same installation way as upper wing connection.
C.G
≈74mm
5,重心调试位置图示
Adjust CG position show
调整电子设备及重心即可进行试飞。
Adjust power system and CG for flight-test.
M3 self-tapping screw
M3 self-tapping screw
M3*20 Screw+Nut cap
According to the motor length you use, adjust motor mounting
board extension length.Then fasten it with right-angled
aluminium block and self-tapping screw.
Fasten the scale engine on the motor mounting board with
glue.Fasten the cowling on the nose with self-tapping screw.
Install the link rod for rudder and
elevator with "X" shaped.
转向舵，升降舵连杆成X型交错安装
像真引擎安装图示
Scale machine gun installation show
