Mini Shark
Instruction Manual
EPP Airplane
13.Paste the servo in the preserved hole with foamy
glue,and assemble the servo horn;Assemble the other side
in same way.
14.Insert and glue the servo wires into the slot.
15.Insert the wing into the fuselage and put the servo wires
inside of the fuselage.
16.Insert the round pole in the preserved hole on the
fuselage,adjust the wing in the middle position,finally
fasten the wing with rubber band.
17.Install the servo horn onto the rudder and elevator as
picture shown below,insert the steel wire linkage through
the tail into the fuselage,connect the Z-shape end onto the
servo horn.
18.Connect the other end of the linkage with servo arm
EZ-connector inside the fuselage.
19.Install the servo horn on the aileron,fasten the Z-shape
end linkage onto the servo horn,connect the other end onto
the EZ-connetor;Assemble in same way the other side.
