or deactivates operation of the machine.
Operation of wireless remote control
11
) LED display Button
Press this button to clear the display on
the indoor unit, press it again to light the
display.
NOTE:
To disconnect power completely, the power cord must be removed after deactivating the machine.
)
AUTO
1
2
3
4
5
6
7
REMOTE DISPLAY WINDOW:
1) Digital Display Area:
Shows the set temperature (in °C ). When the
Auto-timer is being programmed, the display also shows the Auto-timer
settings.
2) Transmission Indicator:
This indicator flashes when the remote signals the
unit.
3) Mode Display:
Indicates which operation is currently selected.
4) Lock Display:
This indicator appears when the remote control has been
locked.
5)
6)
NOTE:
To disconnect power completely, the power cord must be unplugged after deactivating the machine.
WARNING:
Keep the remote control away from all liquids.
Important Notes on the Remote Control:
panel.
• Protect the remote control from high temperatures, and keep it away from radiation exposure.
• Keep the control panel receiver out of direct sunlight.
• Keep the remote control away from Electro-Magnetic-Interference (EMI) generated by other household appliances.
This display area shows the settings of the TIMER. That is, if only the Auto-on time function is set, it will
display TIMER ON. If only the Auto-off time function is set, it will display TIMER OFF. If both functions are
set, it will display TIMER ON OFF which indicates you have chosen both the Auto-on time and Auto-off time.
TIMER display
MODE display (FAN mode and fan speed)
10)
11)
12
Sleep button:
Select this funtion
the most comfortable temperature and
save energy. This function is available on COOL, HEAT or AUTO mode only.
NOTE:
by
Sleep mode program can be cancelled at any time during operation
pressing
buttons.
the MODE,
or
13
Used to start or stop the speed cooling
Note:
The unit system will automatically
revert back to the previous settings after
continue operating under speed cooling
mode for about 20 minutes.
14 ) TURBO Button
7) ON /OFF d is p l a y:
• Be sure there are no block between the remote control and the receiver (signal interceptor) on the unit’s control
This indicator will be displayed when the remote is operating
Fan Speed Selection button: Pressing alternates between available fan speeds (some operations only).
Power On/Off button: Pressing activates
during the sleeping time. It can maintain
• If the remote control will not be used for extended periods of time (vacations etc.), batteries should be removed.
• Do no t mix old and new batteries.
• Do not mix alkaline,standard (carbon-zinc), or rechargeable (ni-cad,ni-mh,etc) batteries.
• This Class B digital apparatus complies with Canadian ICES-003.
• The remote operates within a range of 8 meters (26 ft.) from the receiver located inside the main unit.Any obstruction between
the receiver and remote may cause signal interference, limiting the ability to program the main unit.
PARTIDENTIFICATION:
