Danby DPA120BCCWDB, Owner'S Use And Care Manual

Page: 12 / 36

9
Installation Instructions
LOCATION
• The air conditioner should be placed on a fi rm foundation to minimize noise
and vibration. For safe and secure positioning, place the unit on a smooth,
level fl oor strong enough to support the unit.
• The unit has casters to aid placement, but it should only be rolled on
smooth, fl at surfaces. Use caution when rolling on carpeted surfaces. Use
caution and protect fl oors when rolling over wood fl oors. Do not attempt to
roll the unit over objects.
• The unit must be placed within reach of a properly rated grounded socket.
• Never place any obstacles around the air inlet or outlet of the unit.
• Allow at least 30 cm of space away from the wall for effi cient air conditioning.
WINDOW SLIDER KIT INSTALLATION
Your window slider kit has been designed to fi t most standard vertical and horizontal window applications, however, it may
be necessary for you to modify some aspects of the installation procedures for certain types of windows.
Visit www.danby.com for general instruction videos.
Press the exhaust hose into the window slider adapter and
unit adapter. The adapters will automatically clamp to the
exhaust hose using internal elastic buckles.
Insert the unit adapter into the lower groove of the air
outlet on the unit. Ensure that the hook of the adapter is
aligned wit hthe hole seat of the air outlet and slide down
in the direction of the arrow on the unit.
Measure the window opening where the window kit
will be installed and extend the sliders to match the
measurement. If the legth of the window opening
requires three window sliders, use the bolt to fasten
the sliders at the proper length.
If the window opening is less than the minimum
length of the window slider kit, use the single slider
that has the hole in it and cut it to the correct size.
Ensure that you do not cut the end of the slider that
has the hole in it, this will ne necessary to attach the
exhaust hose assembly.