INSTALLATION INSTRUCTIONS
9
REQUIRED TOOLS
1. Medium sized Phillips screwdriver
2. Tape measure or ruler
3. Knife or scissors
4. Saw (if the window sliders need to be cut to size)
ACCESSORIES
1. Air outlet adapter
2. Exhaust adapter module A
3. Exhaust adapter module B
4. Exhaust adapter module C
5. Exhaust adapter screw
6. Window slider A
7. Window slider B
8. Window slider C
9. Window slider bolts (x4)
10. Foam seal A (adhesive) (x2)
11. Foam seal B (adhesive) (x2)
12. Foam seal C (non-adhesive) (x2)
13. Drain hose
14. Remote control and batteries
15. Power cord buckle
IMPORTANT WARNING
Do not leave this appliance unattended in a
space where people or animals who cannot
react to a malfunction are located. A malfunction
such as the exhaust hose becoming dislocated,
can cause extreme overheating or death in an
enclosed, unattended space.
WINDOW KIT ASSEMBLY
Step one: prepare the window sliders
1. Measure the window opening where the window
kit will be installed.
2. Assemble as many sliders as necessary to fi t the
window. If the window opening is less than the
minimum length of a single slider, use the slider
that has the hole in it and cut it to the correct
length. Make sure not to cut the end that has the
hole as this is necessary to attach the exhaust
hose adapter.
3. Use the window slider bolts to secure the
window sliders at the correct length.
Step two: prepare the exhaust adapter (for
optional sliding window applications)
Assemble the exhaust adapter module for sliding
windows using the exhaust adapter screw as shown.
The window slider is eccentric so the exhaust
adapter must be installed away from the wall.
Bolt
Bolts
B
A
C
B
A
B
C
A
screw
EXHAUST HOSE
Pull out the hose
1. Rotate the exhaust hose gently backwards.
2. Pull out the exhaust hose.
1
2
3
4
5
6
7
8
9
10
11
12
13
ON
/O
F
F
TE
M
P
S
H C
O U
R T
T
T O
IM
N
ER
T O
IM
F
E F
R
MO
D
E
FA
N
SL
EEP
SW
IN
G
LE
D
14
15
16
