13
Installation Instructions
WATER DRAINAGE
• During dehumidifying modes, remove the upper drain plug from the back of the unit,
install the drain connector (5/8 in. universal female connecter) with 3/4 in. hose (not
included). For the models without a drain connector, just attach the drain hose to the
hole. Place the open end of the hose directly over the drain area in your basement
fl oor. Please refer to Fig. 22.
NOTE: Make sure the hose is secure so there are no leaks. Direct the hose toward
the drain, making sure that there are no kinks that will stop the water from fl owing.
Place the end of the hose into the drain and make sure the end of the hose is down to
let the water fl ow smoothly (see Fig. 22). Never raise it.
• When the water level of the bottom tray reaches a predetermined level, the air
conditioning/dehumidifi cation process will immediately stop, however, the fan motor
will continue to operate (this is normal). Carefully move the unit to a drain location,
remove the bottom drain plug and let the water drain away.
NOTE:
When operating or draining water, always protect carpeting or fl oors from
possible water spillage.
NOTE:
Be sure to reinstall the bottom drain plug before using the unit.
Remove
the drain
plug
Continuous drain
hose
Bottom drain
plug
Fig. 22
