11
FIRST TIME USE
When the microwave is plugged in for the fi rst time
it will beep and the display will show “1:01” and
“CLOCK”. Use the number pad to enter the current
time and then press the clock button to confi rm.
When setting the cook timer, the microwave will
return to standby mode if there is no input within 25
seconds.
During operation:
• Press
the
Start/+30SEC
button to begin
operation.
• Press
the
Stop/Clear
button once to pause a
program and twice to cancel a program.
• The microwave will beep four times and display
“END” at the end of a cooking program. The
microwave will continue to beep every two
minutes until the door is opened or the
Stop/
Clear
button is pressed.
SETTING THE CLOCK
The clock can be set as a 12 or 24 hour clock. Press
and hold the
Clock/Timer
button for 3 seconds
to choose a 12 hour clock, then press it again to
choose a 24 hour clock.
To set the current time:
1. Press the
Clock/Timer
button.
2. Use the number pad to enter the current time.
3. Press the
Clock/Timer
button to confi rm.
During operation, press the
Clock/Timer
button to
see the current time.
Note:
If the set time exceeds the allowable range,
the microwave will return to reset state after
pressing the
Clock/Timer
button.
OPERATING INSTRUCTIONS
MICROWAVE COOKING
1. Press the
Power
button repeatedly to select the
power level.
2. Use the number pad to enter the desired cooking
time. The maximum time is 99 minutes and 99
seconds.
3. Press the
Start/+30SEC
button to begin
operation.
Press Power Button
Power (Display)
Once
100% (P-100)
Twice
90% (P-90)
3 times
80% (P-80)
4 times
70% (P-70)
5 times
60% (P-60)
6 times
50% (P-50)
7 times
40% (P-40)
8 times
30% (P-30)
9 times
20% (P-20)
10 times
10% (P-10)
11 times
0% (P-00)
Note:
If “PL0” is selected, the microwave fan will
run with no cooking function. This power level can
be used to remove odors from the oven.
Note:
During cooking, press the
Power
button to
check the current power level.
