![Danby DDR030BBCWDB Owner'S Use And Care Manual Download Page 6](http://html.mh-extra.com/html/danby/ddr030bbcwdb/ddr030bbcwdb_owners-use-and-care-manual_505224006.webp)
Installation Instructions
• Select a suitable location, making sure you have easy access to an electrical outlet (avoid the use of extension cords).
• Make sure there are no obstructions restricting air
fl
ow through the front air intake grill. Maintain a minimum clearance
of at least 20 cm (8”) between adjacent walls and the back of the unit, to allow for proper air circulation and maximum
ef
fi
ciency. To achieve maximum operating ef
fi
ciency from your dehumidi
fi
er, the recommended (room ambient) operating
temperatures should be between 5°C (41°F) and 35°C (95°F).
• It is important to remember the ef
fi
ciency of a dehumidi
fi
er will be affected by the rate at which new humid air (moisture)
is allowed to in
fi
ltrate the same area. To maintain ef
fi
ciency, the dehumidi
fi
er must be operated in an enclosed area. Keep
all doors and windows closed.
• Do not use this unit outdoors. This dehumidifer is intended for indoor residential applications only. This dehumidi
fi
er
should not be used for commercial or industrial applications.
• Place the dehumidi
fi
er on a smooth, level
fl
oor strong enough to support the unit with a full bucket of water.
• This unit has 4 castors which can move freely. Do not force castors to move over carpet, and refrain from moving the
unit with water in the bucket (the unit may tip over and spill water). Protect wood
fl
oors from possible spillage or scratches
when moving unit.
• Remove accessory bag from bucket and store it in a safe place.
LOCATION
FEATURES
4
CASTOR INSTALLATION (some models)
Castor installation is recommended to avoid damage to
fl
oors.
1. Remove the castors from the bucket of the dehumidi
fi
er.
2. Position the dehumidi
fi
er on its side.
3. Locate the arrow on the bottom of the dehumidi
fi
er and insert the castor
according to the arrow direction.
4. Slide the castor in as far as it will go. The castor will snap into place.
5. Repeat steps 1 to 4 for the other 3 castors.
1
3
4
5
2
6
10
9
7
8
11
1. Control
Panel
2. Front
Panel
3. Water
Bucket
4. Water Level Window
5. Carrying Handle (both sides)
6. Continuous Drain Hose Outlet
7. Air Outlet Grill
8. Air
Filter
9. Power Cord Buckle
10. Caster
11. Power Cord and Plug