EMBER BED INSTALLATION
WARNING: The next step involves
glass. Always use extreme caution
when handling glass. Failure to do
so could result in personal injury or
property damage.
This fi replace will come with the
faux log bed pre-installed. To
change to the provided clear
crystals, follow the steps below.
1. The glass should be removed
before installation. Remove the
two thumbscrews on the top left
and top right side of the glass.
2. Lift the glass panel upward to
remove it.
3. Remove the two thumbscrews
from each side of the faux log
bed.
4. Remove the faux log bed and
replace the screws. Spread the
clear crystals onto the ember
bed.
5. Replace the glass on the front
of the fi replace, ensuring the
locating tabs engage securely
in their corresponding slots
and that the thumbscrews are
tightened
2
4
3
1
12
INSTALLATION INSTRUCTIONS
