background image

DOOR REVERSAL INSTRUCTIONS

The direction that the door opens can be reversed by 

following the below instructions.

•  Ensure the appliance is unplugged and empty.

•  We recommend that two people handle the appliance 

during the door reversal process.

•  If the appliance will be placed on its back, protect your 

fl ooring with a blanket or towel.

•  You will require a cross-bladed screw driver (Phillips 

head).

IMPORTANT

The appliance may be placed on its back to complete 

the door reversal however, any time the unit is placed 

on its back or side you must allow it to stand upright for 

a minimum of 6 hours before plugging it in to allow the 

coolant to settle. Not allowing the coolant to settle can 

cause the appliance to malfunction.

1.  Remove the plastic hole covers located on the top left side 

of the refrigerator as shown in Fig. 1.

2.  Remove the upper hinge cover and the upper hinge on the 

right side of the refrigerator, as shown in Fig. 2.

3.  Remove the door from the lower hinge pin by pulling it 

gently upwards. Remove the lower hinge bracket on the 

right side of the unit and remove the leveling foot on the 

left side. Reverse their positions as shown in Fig. 3.

4.  Install the lower hinge on the left side of the refrigerator. 

Install the adjustable foot on the right side of the 

refrigerator as shown in Fig. 4.

5.  Move the door bushing to the left and the plastic hole 

cover to the right as shown in Fig. 5.

6.  If there is a door stopper, move it from the right side of 

the appliance to the left as shown in Fig. 6. If there are 

two door stoppers, there is no need to move them. Install 

the door onto the lower hinge pin, now located on the left 

side of the appliance.

7.  Install the upper hinge and hinge cover on the left side of 

the unit. Place the plastic hole covers in the holes on the 

right side of the top of the refrigerator to cover the screw 

holes as shown in Fig. 7.

Note:

 When installing the door, ensure that the top of the 

door is level with the top of the cabinet. If the door is not 

level, the rubber gasket will not make a good seal with the 

cabinet which can cause the appliance to malfunction.

11

4

5

1

2

3

6

7

OPERATING INSTRUCTIONS

Summary of Contents for DCR032XA3BSLDB

















Reviews: