5
OPERATING INSTRUCTIONS
Lower hinge
Screws
Adjustable foot
Pin shaft
Washer
Nut
Pin screw
Pin shaft
Pin shaft
Washer
Nut
Pin screw
Pin shaft
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and the upper hinge
from the top right side of the cabinet. Remove
the refrigerator door from the cabinet. Remove
the screw hole cover from the top left side of the
cabinet and install it on the top right side of the
cabinet.
2. Remove the center hinge. Remove the freezer
door. Remove the screw hole cover from the left
side of the cabinet and install it on the right side
of the cabinet.
3. Remove the adjustable foot and the screw that
secures the lower beam from the lower left side
of the cabinet. Remove the lower hinge from the
bottom right side of the cabinet.
4. Remove the washer and nut that secure the pin
screw to the right hole on the lower hinge then
remove the pin screw and the two pin shafts
from the lower hinge.
5. Install the pin screw into the left hole on the
lower hinge and insert the pin shafts into the
adjacent holes, then secure the pin screw with
the washer and nut.
