Problem
Possible Cause
What to do
No Power.
A fuse in your home may
Replace fuse or reset circuit breaker.
be blown or the circuit
breaker tripped.
Power surge.
Unplug the beverage centre, wait a
few seconds and then plug it back in.
Plug not fully inserted into
Make sure the 3-prong plug on the
wall outlet
beverage centre is fully inserted into
outlet.
Cabinet Temperature
Temperature setting
Verify the temperature control setting.
too High
Adjust if neccessary.
Door(s) not shut properly
Ensure that the doors are fully closed
or opened excessively
and that the gaskets are sealing
against the cabinets. Open the doors
only as needed and for short periods
of time.
Recently added a large
Limit the quantity of warm bottles
quantity of warm bottles
being introduced to the cabinet at the
to the cabinet
same time. Attempt to phase in the
load introduction if possible.
)
“Clicking” Noise
Normal sound
No user intervention is required as
this sound is normal during the opera-
tion of the appliance. This audible
‘clicking’ noise may be heard as the
appliance ends or begins a cooling
cycle.
Condensation on the
High humidity conditions
The condensation will subside once
cabinet and/or doors
in the home
humidity conditions return to normal.
Door(s) not shut properly
Ensure that the door is fully closed
or opened excessively
and that the gasket is sealing against
the cabinet. Open the door only as
needed and for short periods of time.
Troubleshooting
Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this trou-
bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or
Danby’s Toll Free Number
1-800-263-2629
for assistance.
9
