Danatronics, Corp.
6
2 Basic Operations
Make sure the connector is plugged into TR 2 when using a single element probe.
Power On the Unit
To power on any ECHO FD, follow these steps:
1.
Press and hold the
F1
key for more than 3 seconds. The power symbol, as shown
below, is under the
F1
key printed on the keypad.
2.
After powering on the ECHO FD, the unit will display the last instrument settings
as well as the battery life in the bottom right corner. The image below shows the
battery life at 49%.
Note:
Set your parameters based on the type of probe you are using.
3.
Press the
MENU/OK
key and use the up and down arrow keys to select the
Setups
option. Press the
MENU/OK
key again.
4.
In the
Setups
menu, use the up and down arrow keys to select the probe closest to
the one you will be using. If none of the options are close, then press the
F1
–
Exit
key to set your own parameters.
Power symbol
under the F1 key