8. Insert the new cylinder
Insert the new cylinder, and
re-insert the lock-screw in
the mortisse-plate. (b)
Click!
b
12. Mounting the back
plate on the door
Insert the screw that originally
held the lock on top of the
rosette plate on the front of
the door, and insert the
threaded tube that
matched it.
16.
Attach the tailpiece adaptor
Choose the right tailpiece adaptor
from the Danalock box.
The green tailpiece adaptor
is designed to match the
adjustable cylinder.
Insert the tailpiece adaptor,
in the center tube on the
backside of the Danalock.
Press on the adaptor
until a click ensures
it is fixed firmly to
the Danalock.
threaded
tube
13. Insert the
second screw
Now insert the long
screw from the box
on the inside of the
door and insert the
threaded tube from
the box on the
outside.
15. Give the tailpiece
the right length
To avoid damaging the danalock
you will have to shorten the new
cylinder tailpiece to max. 35 mm
from the door surface.
Use two pliers or a wire cutter
to shorten the tailpiece.
Danalock V3 EURO Expert install for rosette doors
page 2/3
Rosette plate on the
front side of the door
max.
35 mm
Fit the Danalock over
the back plate.
Make sure the
tailpiece hits the
slide in the middle
of the adaptor.
17. Fit the tailpiece to the middle of the housing base
Find the small marking on
the edge of the backplate
and align the mark on the
back of the Danalock
baseplate with it.
Now you are sure to hit
the notches on the
backplate with the
Danalock.
18. Align the platemarks
Turn the Danalock
clockwise until it clicks
to fasten it to the back
plate.
NOTE: If you need to
unfasten and retry, see
“Uninstall instructions”
at the end of the
manual.
19. Fasten the Danalock
Click!
