Doc no. AX64-8001-A-4
Rev. date 221023
Page 11 of 19
Operation
The AX64 is controlled from a Mac or Windows computer via the Thunderbolt Connection or the Ethernet port
on the rear panel and configured by the DADman software running on the computer. On the front panel status
viewing can be made on some of the primary settings.
Figure 6, Front panel layout
Front panel layout
1.
DAD Logo. Indicates that the unit is turned on, Blinks while the unit is set in standby (off)
2.
On/Standby button. Note that the unit automatically returns to the last power state (on or standby) if
it is power cycled via the mains power
3.
External sync source two-color indicator. Green LEDs shows external sync source OK, red LED indicate
that no or bad sync signal.
4.
Internal sync indicator. Green LEDs shows internal or external sync source
5.
Error indicator, Red LED. Indication in related to hardware performance and can be temperature
overload, Fan error, DAD I/O card failure or general internal boot error. A more specific error
indication will be visible in DADman.
