7
Step 7
Align the holes in the desktop
end rails with the pre-drilled
holes on the underside of the
desktop.
Use the wood screws supplied
to attach the top to the frame, if
you are using a cordless/power
driver make sure it is on a low
torque setting.
8
Step 8
Attach both feet to the legs using
the bolts provided.
9
Step 9
Make sure that both legs are
at their lowest point so that the
desk is level when it is rotated to
its upright position.
PA
CK A
PA
CK A & B
PA
CK C & D
PA
CK B
PA
CK C
PA
CK D
PA
CK E
NOTE
Use
Ø5 x 20mm wood screws to
attach the top to the frame.