dams Benotto BEN50001 Assembly Instructions Download Page 2

1

2

3

Please note the fixing screws are located in their fixing points if not found in the parts bag.

Should you require any assistance in assembling your goods please contact customer services

on 0151 548 7111 between 9am/4:30pm.

Do not tighten bolts fully until you have completed assembly.

● DO NOT STAND ON THIS CHAIR. 

● DO NOT USE THIS CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE FIRMLY SECURED.

● FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.

● IF PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USING THIS PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY AUTHORISED PARTS. 

● AT LEAST EVERY 6 MONTHS ,CHECK ALL BOLTS, SCREWS AND KNOBS TO BE SURE THEY ARE TIGHT.

● USE THIS PRODUCT FOR SEATING ONE PERSON AT A TIME ONLY.

WARNING

DO NOT USE THIS CHAIR AS A STEP LADDER

.

Please unzip and remove all the parts from within the base.

D

C

B

E

Please make sure the lips at the top of the leg are 

located under the edge of the frame. If you have 

difficulty locating the lips into the correct position, 

loosen the self tapping screws either side of the leg 

fitment, which will release the frame from the 

underside of the seat to create the small gap 

needed to slide the lips under the frame. Connect 

the leg and then re-tighten the screws.

A

Lips

Self tapping screw

A

Lips

A×4

Adjustable feet

Reviews: