Damon Astoria 2006, Owner'S Manual

Page: 41 / 112

HOME THEATER
PROGRAMMING
Chapter 6 - Technical Systems
Left
Arrow
Up Arrow
System
Setup
Return
Button
Down
Arrow
Re-
ceiver
Right
Arrow
Enter
Button
PIONEER VSX-D515 PROGRAMMING INSTRUCTIONS-1:
1. Turn the receiver power ON.
2. Press the RECEIVER button on the top left side of the remote.
3. Press the SYSTEM SETUP button located at the center of the remote.
4. Press the RIGHT ARROW button near the center of the remote until the
display reads SP SETUP. Then press ENTER on the remote twice.
5. Press the DOWN ARROW button on the remote until the display reads F
LARGE. Then press ENTER.
6. Press the DOWN ARROW button until the display reads C SMALL. Then
press ENTER.
7. Press the DOWN ARROW button until the display reads S SMALL. Then
press ENTER
8. Press the DOWN ARROW button until the display reads SB NO. Then
press ENTER.
9. Press the DOWN ARROW button until the display reads SW YES. Then
press ENTER.
10. Press the RETURN button three times. This button is located just above
and to the right of the arrow keys.
11. For more programming information please refer to the pioneer vsx-d515
owners manual in your motorhome.
PIONEER VSX-D515 PROGRAMMING INSTRUCTIONS-2:
1. Press the DVD/LD button on the pioneer receiver.
2. Press the SIGNAL select button on the receiver until the display reads DIGI-
TAL.
3. Push the STANDARD button on the receiver until the display reads DOLBY PL.
4. Press the DVR/VCR button on the pioneer receiver.
5. Press the ADVANCED SURROUND button on the receiver until the display
reads 5-STEREO.
6. Press the CD-R/TAPE button on the pioneer receiver.
7. Press the ADVANCED SURROUND mode button on the receiver until the dis-
play reads 5-STEREO.
8. Press the AM or FM button on the pioneer receiver.
9. Press the ADVANCED SURROUND button on the receiver until the display
reads 5-STEREO.
10. Press the CD button on the pioneer receiver.
11. Press the SIGNAL select button on the receiver until the display reads DIGI-
TAL. Press the ADVANCED SURROUND mode button on the receiver until
the display reads 5-STEREO.
12. Press the TV/SAT button on the pioneer receiver.
Power