Doc. No.
Rev.
Date
1.1
1
2020-0
3
-0
6
Damm Cellular Systems A/S, Denmark
BS422 Installation and Setup guideline
BS422
Installation guide-
Specifications subject to change without notice
15
2.1
BS422
C
ONFIGURATION
The BS422 software is preinstalled from factory with default setting (see bellow) and before
the system can be used in an installation this default settings must be adapted to the actuel
need. Please also consult TetraFlex user manual for more details on how to change settings.
Factory settings:
Login user name:
tetraflex
(please change for security reasons)
Login password:
xxxxx
(please change for security reasons)
LAN IP:
172.16.1.10
WAN IP:
auto (DHCP)
Node No.:
1
MCC:
238
MNC:
16024
Mode and TR Physical freq.:
Predefined from ordering
.
2.1.1 Set-up of LAN and WAN IP address
Open Network and Sharing Center Windows settings:
PS: The WAN and LAN connections will only showup if there is an active connection at the
other end of the Ethernet cable. If the WAN or LAN connections is not shown you can set the
IP address etc. by clicking
on the “Change adapter settings” and right click on LAN or WAN
and make the setup in “Properities” – “Internet Protocol Version 4”.
Set the WAN and LAN network parameters for you network (see default factory settings)
