Damalini Easy-Laser E420 Manual Download Page 10

Page: 10 / 58

Display unit

Navigation buttons

To navigate on the screen, use the navigation buttons. The selected icon is marked with

a yellow frame. The navigation buttons are also used to move between the icons in a

submenu and to change the values in the fields.

Navigation buttons

Numerical buttons

OK button

Escape

Function buttons

Function buttons

The icons above the function buttons change depending on which view is currently

displayed on screen.
Below is a list of the most common icons.

Back

to previous view. Press and hold to leave current program.

Back

. There is no “previous view”. Leave the current program.

More

. Contains a submenu with general functions,

such as

(Control panel) and

(Save file).

Submenus

The icons formed as an arrow contain a submenu. Use the navigation buttons to navi-

gate in a submenu. Press to select.

Function button with arrow contains submenu

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for Easy-Laser E420



























































Search results

Summary of Contents for Easy-Laser E420

Reviews:

Related manuals for Easy-Laser E420

Brands by name

Popular brands

Damalini Easy-Laser E420, Manual

Search results

Summary of Contents for Easy-Laser E420

Reviews:

Related manuals for Easy-Laser E420

Brands by name

Popular brands