
step 1
Lay part A onto a blanket or bubble-wrap
as shown above. Slide part B (the planter
base) over the pipe.
step 2
Screw part A onto part B using the screws
provided and tighten with the allen key.
how to assemble this product
step 3
Flip the planter to an upright position.
step 4
Slide the part C (drip tray) into part B
(base). Make sure that the bent lips on the
drip tray slide into the locating channels on
the base so that the drip tray is suspended.
It should not sit on the floor.
step 5
Insert part D (plant holder) into part A.
a
a
a
d
b
b
b
c