9
Connection to the Mains Supply
Devices must be connected according to current rules. It is recommended to be wired by a
professional electrician.
Check that the rated
power of power and outlet match the max wattage indicated on the nameplate.
The correct connection is to insert the plug into a socket with a third contact point to the
ground.
If the device has a power cord installed but no plug, wire it as follows:
The “yellow/green” grounded wire, which must be connected to the terminal should be
0.39" (10mm) longer than others.
The “blue” neutral line has to be connected to the terminal marked with letter “N”.
The “Black, Brown or Red” live wires have to be connected to terminal “L”.
Mains connection can also be made by fitting a double pole switch with a min gap between
the contacts of 0.12 inches ( 3mm ), proportionate to the load.
The yellow/green earth wire should not be controlled by the switch.
Once the appliance is in place, the plug or two-pole switch for the mains connection should
be handy.
IMPORTANT
The power cord should be placed 120°F (50°C) below the ambient temperature.
Safety can only be ensured if it is properly connected to a valid grounded power source in
accordance with electrical safety regulations.
The manufacturer is not responsible for any damage to persons or objects due to lack of a
ground connection.
This equipment must be grounded.
If a gas stove needs to be installed above the wall
oven, the distance between them should be >
1.58”.
