Dalton DLQ Series, Operating And Parts Manual

Page: 7 / 44

4
IMPLEMENT SAFETY
In addition to design and configuration of equipment, safety and accident prevention are dependent upon the aware-
ness, concern, and proper training of personnel involved in the operation, transport, maintenance, and storage of equip-
ment. Failing to follow these safety messages can result in machine damage, personal injury, and/or death.
• Before operating your applicator, thoroughly read and understand your operator’s manual. If you do not understand
any portion of the operator’s manual, contact your local Dalton Ag dealer immediately for clarification.
• Furnish this manual to a new operator.
• Tow with tractor only. Never transport applicator unit in excess of 20 MPH. Maintain a safe speed.
• Use a Slow-Moving-Vehicle (SMV) emblem when transporting.
• Be sure safety decals are readable. All safety related decals must be replaced if the applicator is painted or the de-
cals are otherwise rendered unreadable.
• Install transport link before transporting.
• Always check for overhead obstacles in transporting applicator and before folding or unfolding the wings of the unit.
• Never permit riders on the applicator or tractor.
• Proceed slowly on rough or slippery roadways, on side hills, and around curves to avoid tipping.
• Reduce speed when approaching ditches and corners. Do not make sharp turns with brakes.
• Machinery should be operated only by persons familiar to the tractor, applicator unit, and the safety related items.
• Do not stand on, or straddle tongue when unhitching.
• Do not modify or permit anyone to modify this applicator and any of its components without first consulting your
Dalton Ag dealer.
• Do not lubricate, adjust, or repair when applicator unit is in motion.
• Use only approved replacement parts.
• To prevent serious injury from high pressure fluid, NEVER attempt to inspect, service, or disassemble any part of the
hydraulic system until all pressure is relieved by lowering the toolbar to the ground (or secure with cylinder transport
stops provided).
• High-pressure fluid is nearly invisible but has enough force to penetrate the skin. Never use the hands to search
out a suspected leak. If injured by escaping fluid, obtain medical attention at once to minimize chance of infection.
Wear safety glasses or goggles to avoid eye injury when working on the hydraulic system.
• Always check torque on wheel bolts before transporting.