MAINTENANCE
General Maintenance
●
The cooling water should be replaced
and/or replenished regularly.
●
It is recommended to clean the water con-
tainer, pump, hoses and spray nozzle on a
regular basis. For example, place the
pump in a bucket of clean water after the
sawing job and run the machine for a
minute or so. This also guarantees
a longer lifetime of the pump.
●
When the machine is not used for a longer
period, the pump should not remain in the
muddy cooling water. Cleaning the pump
as described above and leaving it outside
the water container is recommended.
●
Regularly check the saw flanges for wea-
ring out and replace if necessary.
DALTILE 828 BrS OPERATING MANUAL V02/2004R1
PAGE 15
Water Pump
Saw Flanges
828 28-10-2004 09:47 Pagina 15
