21
Follow these steps to configure the system to run Sherlock:
1. Connect cameras as shown in the hardware installation
2. Verify a valid license is installed (run License Manager)
3. Run the
iDiscover
program to detect and configure cameras connected to the
system (icon shortcut on the desktop)
4. Run the
Sapera CamExpert
utility if you want to change settings in any of the
cameras such as exposure, strobe or white balance.
5. Run the
Sapera Acquisition Wizard
; Verify cameras are shown as expected and
save the configuration file SaperaLTDrv.ini by clicking the “save” button.
6. Launch Sherlock via shortcut on the desktop (Sherlock GUI shown below)
Sherlock Setup
