User Manual, Rev 01
37
Teledyne DALSA
Rad-icon 2329 GigE Detector
In FullFOV 1x1 mode the maximum frame rate is 2 FPS. User should take care that
this frame rate is not exceeded. When the frame rate is exceeded, frames will be lost
or result in an incorrect image.
To reach 2 FPS at:
4 frames summing: the internal frame rate is 8 FPS (125 msec). The detector read out
time takes 123 msec. The extended exposure time setting must be set to 2 msec.
3 frames summing: the internal frame rate is 6 FPS (166 msec). The detector read out
time takes 123 msec. The extended exposure time setting must be set to 43 msec.
2 frames summing: the internal frame rate is 4 FPS (250 msec). The detector read out
time takes 123 msec. The extended exposure time setting must be set to 127 msec.
1 frame: the internal frame rate is 2FPS (500 msec). The detector read out time takes
123 msec. The extended exposure time setting must be set to 377 msec.
In FullFOV 1x2 mode the maximum frame rate is 4 FPS. User should take care that
this framerate is not exceeded. When the frame rate is exceeded, frames will be lost or
result in an incorrect image.
To reach 4 FPS at:
4 frames summing: the internal frame rate is 16 FPS (62.5 msec). The detector read
out time takes 61 msec. The extended exposure time setting must be set to 1 msec.
3 frames summing: the internal frame rate is 12 FPS (83 msec). The detector read out
time takes 61.5 msec. The extended exposure time setting must be set to 22 msec.
2 frames summing: the internal frame rate is 8 FPS (125 msec). The detector read out
time takes 61.5 msec. The extended exposure time setting must be set to 63 msec.
1 frame: the internal detector frame rate is 4 FPS (250 msec). The detector read out
time takes 61.5 msec. The extended exposure time setting must be set to 188 msec.
In FullFOV 2x2 mode the maximum frame rate is 8 FPS. User should take care that
this frame rate is not exceeded. When the frame rate is exceeded, frames will be lost
or result in an incorrect image.
To reach 8 FPS at:
2 frames summing: the internal frame rate is 16 FPS (62.5 msec). The detector read
out time takes 61.5 msec. The extended exposure time setting must be set to 1msec.
1 frame: the internal frame rate is 8 FPS (125 msec). The detector read out time takes
61.5 msec. The extended exposure time setting must be set to 63 msec.
Image Format Control
The Rad-icon Image Format controls, as shown by CamExpert, groups parameters
that give information about the resolution and pixel format.
Display Name
Feature
Acc Description
PixelFormat
PixelFormat
RO
Format of the pixel provided by the
device. Contains all information as
provided by PixelCoding and
PixelSize combined in one single
value
Monochrome 16-Bit
Mono16
16 bit packed on 2 bytes (no image data
loss)
Pixel Size
PixelSize
RO Total Size in bits of an image pixel
