Dalsa Piranha HS Series, Getting Started Manual

Page: 9 / 18

Piranhs HS-xx Detailed Getting Started Guide 9
DALSA Corp. 03-32-10147-01
4k
10
29
6 10
30
20
53
20
54
30
77
30
78 7
8k
6 3623
3384 2906 266
7
2428
147
2
314
5
995
21
89
517
7
245
48
4
729 96
1
12
00
1439 1678
1917
2156
23
95
2634
2873 3112
3351 359
0
Framegrabber Configuration Camera Mirror Mode Direction
Configuration matches smm 1 readout smm 0
Area Mode, Reverse Internal Direction, Test
Pattern 1(
tdi 0
,
scd 1
,
svm 1
)
If you see this test pattern, your
framegrabber configuration file
does
not match your mirroring mode.
You will need to reconstruct the
pixel readout definitions in your
framegrabber configuration file. If
you want to operate in forward
direction control, enter the
command
scd 0
.
Note: If you need to change your
direction, you must re-enter all of
the commands in Table 3 to ensure
proper camera configuration.
Configuration matches smm 0 readout smm 1
scd 1
10.
Enter
svm 2
to select a different test pattern. Grab an image with your
framegrabber. The test pattern should look like the one below.
4k
10
08
203
2
3056
40
80
8k
24
0
49
6
752
1264 152
0
1776
20
32
228
8
254
4
280
0
30
56
3312 35
68
38
24
408
0
10
08
Framegrabber Configuration Camera Mirror Mode Direction
Configuration matches smm 0
readout smm 0
Area Mode, Test Pattern 2 (
tdi 0
,
scd
0
,
svm 2
)
If your framegrabber file matches
your mirroring mode, you will see
this pattern.
Camera and framegrabber settings
are listed under the test pattern.
Notice how the framegrabber
configuration matches the camera
mirroring mode.
Note: If you need to change your
direction, you have to re-enter all of
the commands in Table 3 to ensure
proper camera configuration.
Configuration matches smm 1
readout smm 1
scd 0 or 1
If you do not see the test pattern above, you may see one of the following:
4k
1008
2032 3056
4080
8k
240 496 75
2
126
4
15
20
17
76
203
2
228
8
254
4
280
0
305
6
331
2
356
8
382
4
408
0
100
8
Framegrabber Configuration Camera Mirror Mode Direction
Configuration matches smm 1
readout smm 0
Area Mode, Test Pattern 2 (
tdi 0
,
scd
1
,
svm 2
)
If you see this test pattern, your
framegrabber configuration file
does
not match your mirroring mode.
You will need to reconstruct the
pixel readout definitions in your
framegrabber configuration file.
Repeat Part 1.
Note: If you need to change your
direction, you have to re-enter all of
the commands in Table 3 to ensure
proper camera configuration.
Configuration matches smm 0
readout smm 1
scd 0 or 1