Dalsa Genie Nano-CXP Series, User Manual

Page: 78 / 107

76
•
Technical Specifications Genie Nano-CXP Series™
Technical Specifications
Both 2D and 3D design drawings are available for download from the Teledyne DALSA web site
[ http://www.teledynedalsa.com/genie-nano ].
Notes on Genie Nano Identification and Mechanical
Identification Label
Genie Nano cameras have an identification label applied to the bottom side, with the following information:
Model Part Number
Serial number
2D Barcode
CE and FCC logo
Additional Mechanical Notes
For information on Nano lens requirements see Choosing a Lens with the Correct Image Circle .
Each camera side has two mounting holes in identical locations, which provide good grounding capabilities.
Overall height or width tolerance is ± 0.05mm.
Temperature Management
Genie Nano cameras are designed to optimally transfer internal component heat to the outer
metallic body. If the camera is free standing (i.e. not mounted) it will be hot to the touch.
Basic heat management is achieved by mounting the camera onto a metal structure via its
mounting screw holes. Heat dissipation is improved by using thermal paste between the camera
body (not the front plate) and the metal structure plus the addition of a heatsink structure.