74
•
Operational Reference
Linea Lite GigE Series Camera
LUT Value
LUTValue
Returns the value at specified LUT index entry of the
LUT selected by the LUT Selector feature.
Guru
flatfieldCorrectionMode
Sets the mode for the Flat Field correction.
Beginner
DFNC
Off
Off Flat Field Correction is disabled.
Active
Active Flat Field Correction is enabled.
Calibration
Calibration When selected, the camera is configured for flat field
correction calibration. The device may automatically
adjust some of its features when calibrate mode is
enabled. The features that are automatically adjusted
are device specific. The device will not restore these
features when the Flat Field Correction Mode feature is
changed from Calibrate mode to another mode.
Flat Field Correction
Current Active Set
flatfieldCorrectionCurrentActiveSet
Specifies the current set of Flat Field coefficients to use.
User data is uploaded via the file access feature.
Feature used when flatfieldCorrectionMode is
Active
. In
Calibration
, changing this feature has no effect unless
you save the FFC, where this feature defines where to
save the values. This feature also can be used to copy
FFC sets.
Beginner
DFNC
Factory Flatfield
FactoryFlatfield Sets the factory Flat Field coefficient table as the current
Flat Field.
User Flatfield 1
UserFlatfield1 Sets User Flat Field 1 coefficient table as the current Flat
Field.
User Flatfield 2
UserFlatfield2 Sets User Flat Field 2 coefficient table as the current Flat
Field.
User Flatfield 3
UserFlatfield3 Sets User Flat Field 3 coefficient table as the current Flat
Field.
User Flatfield 4
UserFlatfield4 Sets User Flat Field 4 coefficient table as the current Flat
Field.
Flat Field Correction Type
flatfieldCorrectionType
Specifies the Flat Field correction type.
Guru
DFNC
Line-Based
LineBase Flat field correction is based on an individual line
(FlatLine).
flatfieldCorrectionAlgorithm
Specifies the Flat Field correction algorithm to use.
Guru
DFNC
Method 1
Method1 The following formula is used to calculate the flat field
corrected pixel: newPixelValue[x] =
(sensorPixelValue[x] - FFCOffset[x]) * FFCGain[x]
Calibration Algorithm
flatfieldCorrectionCalibrationAlgorit
hm
Specifies the flatfield calibration algorithm to use.
Guru
DFNC
Peak
Peak Each pixel is gained up to the brightest.
Set Target
SetTarget Each pixel is gained up to the value specified in the
flatfieldCalibrationTarget feature.
Flat Field Calibration
Target (in DN)
flatfieldCalibrationTarget
Sets the target pixel value for the gain (PRNU)
calibration.
Expert
DFNC
Flat Field Calibration
Sample Size
flatfieldCalibrationSampleSize
Set flat field calibration sample size (number of lines to
sum).
Guru
DFNC
2048
Lines_2048 2048
4096
Lines_4096 4096
Calibrate FPN
flatfieldCalibrationFPN
Performs Fixed Pattern Noise (FPN) calibration by
reducing to zero dark pixel current using a pixel offset.
Guru
DFNC
Calibrate PRNU
flatfieldCalibrationPRNU
Performs Photo Response Non-Uniformity (PRNU)
calibration to a targeted, user-defined value. PRNU
calibration eliminates the difference in responsivity
between the most and least sensistive pixel, creating a
uniform response to light.
Guru
DFNC
Flat Field Calibration
Width
flatfieldCalibrationROIWidth
Sets the ROI Width.
Guru
DFNC
Calibrate FPN
flatfieldCalibrationFPN
Performs Fixed Pattern Noise (FPN) calibration by
reducing to zero dark pixel current using a pixel offset.
Guru
DFNC
Preliminary
