9
Remote Login
Commissioning
►
Connect the device to the network.
►
Connect the device and relevant peripherals to the voltage supply.
►
Switch on the peripherals and the recorder.
The recorder is available for remote configuration via Ethernet after the start (up to approx. 5 minutes).
The IP address of the device (default 192.168.2.230) can be changed without login using the software
PService
.
Saf
ety
H
DD Moun
ting
Moun
ting
Login
C
onnec
tions
Dimensions
Login
In the initial state it is possible to login remotely using the serial number as password. The rights of the Administrator group
are valid.
Note that the definition of the passwords and the network parameters is necessary for remote access (e. g. PView
7
).
►
Observe the PService documentations.
►
Start the software PService and execute a scan of the network.
►
Find the relevant recorder in the displayed list.
►
Start the NetConfig application via the corresponding context menu.
►
Observe the appropriate Configuration documentation.
The connection will be established.
Device information is displayed.
The password input field is displayed.
►
Enter the serial number (e.g. DAX2-12345678) as
Password
.
►
Confirm with
Login
.
The configuration interface is displayed.
The configuration interface is compressed for slow network connections before transmission if the
Slow Network
check-box is
activated.