background image

www.dallmeier.com 

7

Commissioning MDF4220HD

4  Safety Instructions

Only use the device if it is technically in proper working condition and for the 

intended purpose while keeping safety and potential dangers in mind.

• 

Qualified Personnel 

The installation, mounting, connection, commissioning and configuration of the 

device may only be carried out by qualified personnel.

 

This also applies to the maintenance, testing and repair, whereat the regula

-

tions of the DIN VDE 0701 series of standards (repair, modification and inspec

-

tion of electrical appliances) must be followed.

• 

Regulations 

The use of video and audio surveillance systems is, in general, strictly regu

-

lated. Inform yourself about the currently valid laws and regulations regarding 

data, worker and environmental protection before using the device and ensure 

compliance with them.

• 

System Components 

Only use internal components that have been tested and approved by Dallmeier. 

Inappropriate internal components may cause malfunctions, damages and data 

loss and may result in the loss of warranty.

• 

Modifications 

Do not make any modifications to the hardware or software that have not been 

tested and approved by Dallmeier.

 

Inappropriate modifications may cause malfunctions, damages and data loss 

and may result in the loss of warranty.

Summary of Contents for MDF4220HD









































Reviews: